10 Tons Hydraulic Decoiler 1250mm Coil Width Tapered Wedge Design

Product Description

6Tons hydraulic de – coiler for metal roof/ wall roll forming machine

Quick Detail:

1. Thickness : 0.4mm-0.8mm/0.8mm-1.2mm
2. Material : Pre-painted Coil, full hard or soft yield strength
3. Input width: 1250mm
4. Material weight: Max. 10MT

Description/Technical Parameter details of the de-coiler

Taiwan famous Delta brand inverter

Hydraulic system to expand coil inner hole；Pump motor: 3KW

Coil Inner-diameter= 510±30mm

Coil Outer-diameter Max.1500mm

Taper wedge expand type

Load Capacity: Max. 10 Tons

Coil Width Max. 1250mm

Manual support arm at the end of the main mandrel

Driving motor with gear box to turn the coil, 5.5KW

manual frequency speed control

The rotation speed to be suitable for the roll former with max. line speed 25mpm

Hydraulic top arms to press the coils and keep the coil tight

10 tons capacity coil car:

Up/down stroke of coil car: Max. 450mm

Forward/backward stroke of coil car: Max. 2000mm

Application:

Based on different capacities, we provide 5ton hydraulic un-coiler, 8ton hydraulic de-coiler, 10ton hydraulic de-coiler, 12ton hydraulic de-coiler and 15 ton hydraulic de-coiler. Usually there is a coil car equipped for hydraulic de-coiler over 5ton capacity. The extra cars can move horizontally and also lift up and down to transport and get the coils inserted in the center by the arm of the hydraulic de-coiler.

Profile Drawing/Layout/Equipment reference pictures: