logo
vr
Good price online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Door Frame Roll Forming Machine
Created with Pixso. Cr12 Blade Shutter Door Guide Rail Roll Forming Machine
Detail Information
Place of Origin:
CHINA
Certification:
CE/SONCAP/CSA
Name:
Guardrail Roll Forming Machine
Roller Material:
45# Steel, Heat Treatment, Hard Chrome Coated
Raw Material:
GI Sheets, G350-550
Cutting Blade Material:
Cr12, Heat Treatment
Coil Weight:
3T Or As Per Request
Warranty:
12months
Packaging Details:
NUDE CARGOES FOR ROLL FORMER WITH CUTTER IN 20/40FT CONTAINER, WOODEN BOX FOR PLC CONTROL CABINET
Supply Ability:
10 UNITS/MONTH
Highlight:

Cr12 Blade Roll Forming Machine

,

Door Guide Rail Roll Forming Machine

,

Cr12 Blade Roll Former

Product Description

Guide Rails Channel Roller Shutter Door Slat Steel Door Guide Roll Forming Machine

 

Quick Detail:

  1. Thickness : 0.8-1.2mm
  2. Material : GI, 350Mpa
  3. Input width : as per drawings 
    1. Material weight: 3MT cap.
    2. Driven way: by 11Kw driven motor
    3. Cutting way: stop to cut, there is waste after cut-off
    4. Cutting tolerance : ±1mm

Features:

it is the rails guides that should work together with other guide panel.

It is normally 1.0-1.2mm can also up to 1.5mm

the machine also need feeding guide, 7 roll straightening device, roll forming, cutting and PLC control system.

Machine list:

  1. 3MT*300mm manual un-coiler
  2. Roll forming machine
  3. Hydraulic cutting device
  4. Run out table
  5. PLC control cabinet

Description/Technical Parameter details of complete line:

  • 1.5TX300mm Manual Un-Coiler or Driven de-coiler

Un-powered; Load capacity= MAX.1.5Ton

Coil inner–diameter=410-570mm

Coil Width= MAX.300mm

  • Roll forming machine with cutting details as below table :
Suitable roll forming material galvanized steel sheet
Thickness 1.0-1.2mm
Strip width as per drawings
Carriage Frame design Wall-plate-frame-design
Roll forming stages 16 stages
Roller material 45# steel, heat treatment, hard chrome coated
Shafts Diameter Φ75mm
Main motor power 11Kw with reducer
Line speed of roll former 15mtr per min
Hydraulic group power 4 Kw
Material of cutting blade Cr12, hear treatment
Electric Voltage Standard 415V/50Hz/3PH or requirements
Major Color of Machine Painted RAL 5015(Blue) or customized
  • PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

  • Product Rack 4 meter length rolled type

Profile Drawing/Layout/Equipment reference pictures:

Cr12 Blade Shutter Door Guide Rail Roll Forming Machine 0