Customized Purlin Roll Former , Sheet Metal Roll Forming Machines For Column Support

Product Description

Roll forming machine for colum support, galvanized sheets for channel machine

Quick Detail:

1. Thickness : 1.2mm
2. Material : GI sheets, 245Mpa
3. Material weight : 5Mt
4. Coil inner diameter : 565mm
5. Driven way: by 15kw*2 driven motor
6. Cutting way: by stop to cut design
7. Cutting tolerance : ±1mm

Application:

This total four same profiles joint in one round shape as column to support the buildings, so the precision of the profile is strict for good joint with each other after cut-off

It consist of de-coiler, hydraulic pre-punching device, roll forming machine, cutting device and run out rack and PLC control cabinet

Machine list:

1. Hydraulic De-coiler
2. Hydraulic Pre-punching device
3. Roll forming machine
4. Hydraulic Post- cut device
5. Run out table
6. PLC control systems

Description/Technical Parameter details of complete line:

• 5TX600mm Hydraulic Un-coiler or manual de-coiler

Un-powered; Load capacity= MAX.5Ton

Hydraulic system to expand coil inner hole, Pump motor: 3KW

Coil inner–diameter=510+/-30mm

Coil Width= MAX.600mm

Mandrel rotation: Draft type

• Hydraulic Pre-punching device

Share in the same hydraulic group with post cut

1. Punching the order holes
2. Press the LOGO as required
3. Roll forming machine details as below table :

• Hydraulic Post-cut device

Hydraulic group: 11KW

Stop to cut design

There is waste after cut-off

Cutting material: Cr12, heat treatment

• PLC Control System

Control the quantity & cutting length automatically

Combined with: Siemens brand PLC and Touch Screen

Schneider brand Inverter, Omron encoder, etc

Cut-to-length tolerance≤±1mm

Control voltage 24V

• Product Rack 4 meter long ,rolled type

Profile Drawing/Layout/Equipment reference pictures: