Send Message

C Section Roll Forming Machine , C Purlin Forming Machine For Building Material

Product Details:
Place of Origin: CHINA
Certification: CE/SONCAP/CSA
Model Number: C80-300
Payment & Shipping Terms:
Minimum Order Quantity: 1 UNIT
Price: negotiation
Delivery Time: 40 WORKING DAYS
Payment Terms: L/C, D/A, D/P, T/T
Supply Ability: 10 UNITS/MONTH

Detail Information

Name: C Purlin Roll Forming Machine Coil Weight: 5T Or As Request
Shaft Diameter: 75mm Cutting Blade Material: Cr12, Heat Treatment
Warranty: 12 Months Raw Material: GI Sheets, G350
High Light:

purlin making machine


purlin roll former

Product Description

C profile Purlin roll forming machine, galvanized sheets


Quick Detail:

  1. Thickness : 1.5mm-3.0mm
  2. Material : GI sheets, 245Mpa
  3. Material weight : 5Mt
  4. Coil inner diameter : 510mm
  5. Driven way: by 15kw*2 driven motor
  6. Cutting way: by stop to cut design
  7. Cutting tolerance : ±1mm


C purlin roll forming machine is equipment that produces C shaped steel channels continuously out of galvanized or cold rolled steel strips from feeding, punching for holes, bending and cutting.

Compared to traditional purlins, steel purlins have so many advantages, they are light, easy to install, and recyclable for other buildings etc. Therefore, as we can see, in modern steel industrial buildings or prefab engineered buildings, people always use C purlins, Z purlins and sometime U purlins without flange stiffeners as well.

Machine list:

  1. Hydraulic De-coiler
  2. Pre-leveling device
  3. Hydraulic Pre-punching device
  4. Roll forming machine
  5. Hydraulic Post- cut device
  6. Run out table
  7. PLC control systems

Description/Technical Parameter details of complete line:

  • 5TX600mm Hydraulic Un-coiler or manual de-coiler

Un-powered; Load capacity= MAX.5Ton

Hydraulic system to expand coil inner hole, Pump motor: 3KW

Coil inner–diameter=510+/-30mm

Coil Width= MAX.600mm

Mandrel rotation: Draft type

  • Pre-Leveling Device

Pre-Level Device with 4 over 3 shafts to remove the Coil-set

Share the same motor with the roll former

  • Hydraulic Pre-punching device

Share in the same hydraulic group with post cut

To punch below holes

Single slotted or round holes on web

Double slotted or round holes on web

Single slotted or round holes on flange each side

  • Roll forming machine details as below table :
Suitable roll forming material Color steel sheet or galvanized steel sheet
Thickness 1.5-3.0mm
Carriage Frame design wall-plate-frame-type
Rolling mills forming stages 15 stages
Material of forming roller Cr12, heat treatment
Shafts Diameter Φ75mm
Main motor power 15Kw*2
Production speed 12m/min
Electric Voltage Standard 380V/50Hz/3PH or as request
Major Color of Machine Painted RAL 5015(Blue) or as request


  • Hydraulic Post-cut device

Hydraulic group: 11KW

Stop to cut design

There is not waste after cut-off

Cutting material : Cr12, heat treatment

  • PLC Control System

Control the quantity & cutting length automatically

Combined with: Siemens brand PLC and Touch Screen

Schneider brand Inverter, Omron encoder, etc

Cut-to-length tolerance≤±1mm

Control voltage 24V

  • Product Rack 4 meter long ,rolled type

Profile Drawing/Layout/Equipment reference pictures:


C Section Roll Forming Machine , C Purlin Forming Machine For Building Material 0C Section Roll Forming Machine , C Purlin Forming Machine For Building Material 1

Get in touch with us

Enter Your Message

You Might Be Into These