Send Message

C75 Stud And Track Roll Forming Machine For Roofing Buildings / GI Sheets

Product Details:
Place of Origin: CHINA
Certification: CE/SONCAP/CSA
Model Number: C75
Payment & Shipping Terms:
Minimum Order Quantity: 1 UNIT
Price: negotiation
Delivery Time: 40 WORKING DAYS
Payment Terms: L/C, D/A, D/P, T/T
Supply Ability: 10 UNITS/MONTH

Detail Information

Name: Metal Stud And Track Roll Forming Machine Control System: PLC Control System
Roller Material: 45# Steel Or Cr12, Heat Treatment Raw Material: GI Sheets, G550
Shaft Diameter: 65mm Cutting Blade Material: Cr12, Heat Treatment
High Light:

ceiling roll forming machine


furring channel roll forming machine

Product Description

C75 stud and track roll forming machine for roofing buildings, GI sheets


Quick Detail:

  1. Thickness : 0.8-1.2mm
  2. Material : Galvanized steel
  3. Material weight: 1.5MT cap.
  4. Driven way: by 5.5Kw driven motor
  5. Cutting way: by hydraulic power pack, there is waste after cut-off
  6. Cutting tolerance : ±1mm


On a heavy gauge metal or steel structural building, people always use C steel purlins or Z steel purlins to build the steel frames and roof trusses, while Metal furring channels or roof channels climb to the top of components lists for roof trusses of lightweight or light gauge steel frames.

The metal furring channels or hat channels are produced from thin galvanized steel (0.6-1.2mm thickness) by roll forming machines and a metal furring channel or hat channel roll forming machine, like other lightweight or light gauge steel frame roll forming machines, generally consists of a manual de-coiler, a feeding unit, an embossing rolling tool, a roll forming unit, a cutting unit, a transmission system, a cutting unit, a hydraulic oil pump, a PLC control system and runout tables.

Machine list:

  1. 1.5MT*300mm manual un-coiler
  2. Roll forming machine
  3. Hydraulic cutting device
  4. Run out table
  5. PLC control system

Description/Technical Parameter details of complete line:

  • 1.5TX300mm Manual Un-Coiler

Un-powered; Load capacity= MAX.1.5Ton

Coil inner–diameter=410-570mm

Coil Width= MAX.300mm

  • Roll forming machine with cutting details as below table :
Suitable roll forming material galvanized steel sheet
Thickness 0.8mm-1.2mm
Carriage Frame design Wall-plate-frame-design
Rolling mills forming stages 14 stages
Material of forming roller 45# steel, heat treatment Hard Chrome Coated
Shafts Diameter Φ65mm
Main motor power 7.5Kw with reducer
Line speed of roll former 15mtr per min
Hydraulic group power 3.0 Kw
Material of cutting blade Cr12, hear treatment
Electric Voltage Standard 380V/50Hz/3PH or requirements
Major Color of Machine Painted RAL 5015(Blue) or customized
  • PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

  • Product Rack 4 meter length rolled type

Profile Drawing/Layout/Equipment reference pictures:

C75 Stud And Track Roll Forming Machine For Roofing Buildings / GI Sheets 0C75 Stud And Track Roll Forming Machine For Roofing Buildings / GI Sheets 1

Get in touch with us

Enter Your Message

You Might Be Into These