logo
vr
Good price online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Stud And Track Roll Forming Machine
Created with Pixso. High Speed Stud And Track Roll Forming Machine For Combo Under Tile Flashing
Detail Information
Place of Origin:
CHINA
Certification:
CE/SONCAP/CSA
Coil Weight:
Stud And Track Roll Forming Machine
Roller Material:
45# Steel Or Cr12, Heat Treatment
Raw Material:
GI Sheets, G550
Shaft Diameter:
65mm
Control System:
PLC Control System
Cutting Blade Material:
Cr12, Heat Treatment
Packaging Details:
NUDE CARGOES FOR ROLL FORMER WITH CUTTER IN 20/40FT CONTAINER, WOODEN BOX FOR PLC CONTROL CABINET
Supply Ability:
10 UNITS/MONTH
Highlight:

light keel roll forming machine

,

ceiling roll forming machine

Product Description

Roll forming machine for combo under tile flashing, trim flashing

Quick Detail:

  1. Thickness : 0.4-0.6mm
  2. Material : G350 PPGI
  3. Input width : 224/253mm
    1. Material weight : 1.5Tons
    2. Coil inner diameter : 508mm
    3. Driven way: by driven motor
    4. Cutting way: after cut-off, there is 8mm waste
    5. Cutting tolerance : ±1mm

Application:

A trim and flashing roll forming machine work with gutter roll forming machine, valley metal sheets roofing machine and the ridge cap and downpipe and end cap and support fixing as a water roof systems

 

Machine list:

  1. 1.5T*300mm manual un-coiler
  2. Roll former
  3. Hydraulic cutting device
  4. Run out table
  5. PLC control system

Description/Technical Parameter details of complete line:

  • 1.5TX300mm Manual Un-Coiler

Un-powered; Load capacity= MAX.1.5Ton

Coil inner–diameter=410-570mm

Coil Width= MAX.300mm

  • Roll forming machine with cutting details as below table :
Suitable roll forming material Alu-zinc sheets, 550Mpa
Thickness 0.4mm-0.6mm
Coil input width 224/253mm
Carriage Frame design Wall-plate-frame-design, 18mm thickness
Rolling mills forming stages 12 stages
Material of forming roller 45# steel, CNC lathes, Hard Chrome Coated as normal design
Shafts Diameter Φ65mm
Main motor power 4Kw with reducer
Rolling speed of roll former 18m/min
Hydraulic group power 3.0 Kw
Cutting material Cr12, hear treatment
Electric Voltage Standard 380V/50Hz/3PH or as the customer's requirements
Major Color of Machine Painted RAL 5015(Blue) or as per customer’s requirements
  • PLC Control System

Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Siemens brand PLC and touch screen,

Cut-to-length control, tolerance≤±1mm

Control Voltage 24V

  • Product Rack 4 meter rolled type rack

Profile Drawing/Layout/Equipment reference pictures:

 

High Speed Stud And Track Roll Forming Machine For Combo Under Tile Flashing 0