Send Message

PLC Control Stud And Track Roll Forming Machine Smart Design Top Trim Roll Former

Product Details:
Place of Origin: CHINA
Certification: CE/SONCAP/CSA
Model Number: YX38-46
Payment & Shipping Terms:
Minimum Order Quantity: 1 UNIT
Price: negotiation
Delivery Time: 40 WORKING DAYS
Payment Terms: L/C, D/A, D/P, T/T
Supply Ability: 10 UNITS/MONTH

Detail Information

Weight: 5T Control System: PLC Control System
Roller Material: 45# Steel Raw Material: PPGI/Galvanized/Alu-Zinc/PPGL Sheets, G245-550
Shaft Material: High Grade No.45 Forged Cutting Blade Material: Cr12, Heat Treatment
High Light:

ceiling roll forming machine


furring channel roll forming machine

Product Description

Top trim/ flashing roll former to cover the roofing panel, smart design for small rolling machine


Quick Detail:

  1. Thickness : 0.42mm-0.6mm
  2. Material : Pre-painted Coil, 345Mpa
  3. Input width : 136mm
  4. Material weight : 1.5MT
  5. Cutting way: by hydraulic group, no waste cut
  6. Cutting tolerance : ±1mm

Description/Technical Parameter details of complete line:

  • 5TX1250mm hydraulic de-coiler with/without coil car

Un-powered; Load capacity= Max.1.5Ton

Coil inner–diameter=410-570mm

Linked connected type design

Coil Width= Max.300mm

  • Roll forming machine with cutting details as below table :
Suitable roll forming material Pre-painted Sheets, 245-550Mpa
Thickness range 0.42mm-0.6mm
Coil width 136mm
Carriage Frame design Wall-plate-frame-design
Roll forming stages 16 stages
Material of forming roller 45# steel, CNC lathes, Hard Chrome Coated
Shafts Diameter Φ65mm
Main motor power 4Kw with reducer
Rolling speed of roll former 18m/min
Hydraulic group power 3.0 Kw
Material of cutting blade Cr12, hear treatment as normal design
Electric Voltage Standard 380V/50Hz/3Ph or as the customer's requirements
Major Color of Machine Painted RAL 5015(Blue) or as per customer’s requirements
  • PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

  • Product Rack Un-powered, 3 units

Machine list:

  1. Hydraulic un-coiler with/without coil cart
  2. Normal speed roll former
  3. Hydraulic cutting device
  4. Run out table or automatic stacking device for quick packing
  5. Siemens PLC and touch screen, Schneider brand inverter


A trapezoidal roof panel roll forming machine is always adjustable for different feeding widths. You can make trapezoidal roof panels with different effective widths from different-width materials.

This panel is to cover between two roofing panel pitches.

So this panel can be done by roll former or by pressing dies or by folding machine also.

Profile Drawing/Layout/Equipment reference pictures:

PLC Control Stud And Track Roll Forming Machine Smart Design Top Trim Roll Former 0PLC Control Stud And Track Roll Forming Machine Smart Design Top Trim Roll Former 1PLC Control Stud And Track Roll Forming Machine Smart Design Top Trim Roll Former 2


Get in touch with us

Enter Your Message

You Might Be Into These