Square Round Downspout Downpipe Roll Forming Machine For Rain Gutter Downspouts

Product Description

Square / Round Downpipe/Downspout Automatically Roll Forming Machine For Rain Gutter Downspouts

Application:

A downspout roll forming machine, known as rainwater downpipe roll forming machine as well, has been designed for making square or round (circle or rectangular) rainwater pipes.

A downspout has many different names as, waterspout, downpipe, drain spout, and roof drain pipe etc. According to wiki, the downspouts are applied mainly as below:

Downspouts are usually vertical and usually extend down to ground level. The water is directed away from the building’s foundation, to protect the foundations from water damage. The water is usually piped to a sewer, or let into the ground.

Quick Detail:

1. Thickness : 0.4-0.6mm
2. Material : Galvanized Sheets
3. Input width : 406mm
   1. Material weight : 3MT
   2. Coil inner diameter : 510 mm
   3. Driven way: by driven motor
   4. Cutting way: no waste cut
   5. Cutting tolerance : ±1mm

Machine list:

1. 3T*600mm hydraulic un-coiler or manual un-coiler
2. Roll former
3. Hydraulic cutting device
4. Run out table
5. Siemens PLC and IOP/ touch screen, Schneider brand inverter

Description/Technical Parameter details of complete line:

• 3TX600mm Hydraulic Un-Coiler

Hydraulic system for expansion coil-inner-hole with 4 palms

Link-connect expanding system

Pump power=1.5KW

Frequency Inverter to regulate turning speed: Motor: 2.2KW

Load capacity=3 Ton; Coil Inner – diameter =451-530 mm

Coil outer-diameter=Max. 1500 mm

Coiler Width=Max. 600 mm

Driving motor to turn the coil

• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack Un-powered, 3 units
• 

Profile Drawing/Layout/Equipment reference pictures: