Send Message

Economic Design Roof Sheet Rolling Machine Double Layer With Touch Screen

Product Details:
Place of Origin: CHINA
Certification: CE/SONCAP/CSA
Model Number: YX30/YX26
Payment & Shipping Terms:
Minimum Order Quantity: 1 UNIT
Price: negotiation
Delivery Time: 40 WORKING DAYS
Payment Terms: L/C, D/A, D/P, T/T
Supply Ability: 10 UNITS/MONTH

Detail Information

Name: Double Deck Roll Forming Machine Control System: PLC Control System
Raw Material: PPGI/Galvanized/Alu-Zinc/PPGL Sheets, G245-550 Shaft Material: High Grade No.45 Forged
Weight: 5T Roller Material: 45# Steel
Cutting Blade Material: Cr12, Heat Treatment
High Light:

corrugated sheet roll forming machine


wall panel roll forming machine


Roof Sheet Rolling Machine Double Layer

Product Description

Double layer roof sheets roll forming machine, economic design for double layer roll forming machine


Quick Detail:

  1. Thickness : 0.4-0.8mm
  2. Material : G550/G350, pre-painted sheets
  3. Input width : 914/1000/1219/1250mm
  4. Coil ID: 508mm
  5. Effective width:760/820/1000+/-4mm
  6. Material weight: 5Tons cap.
  7. Driven motor: 11Kw motor with gear box normally
  8. Cutter Material: Cr12, heat treatment


Compared to a single layer roof panel roll forming machine, a double layer roll forming machine is designed to produce two different kinds of metal sheets which can be one trapezoidal roofing and one roof/wall cladding sheet; or one trapezoidal roofing sheet and one corrugated roofing sheet; or one trapezoidal sheet and one metal roof tile; or one corrugated sheet and one metal glazed roof tile etc. To sum up, any two of the metal roof panels can be produced by this same double deck roll forming machine.


Machine list:

  1. Hydraulic De-coiler
  2. Dual layer roll former
  3. Two sets of hydraulic cutting device
  4. Run out table or automatic stacking device
  5. Siemens PLC and IOP/ touch screen, Schneider brand inverter

Description/Technical Parameter details of complete line:

  • 5TX1250mm Hydraulic Un-Coiler with coil car

Hydraulic system to expand coil inner hole, Pump motor: 3KW

Coil Inner-diameter= 510±30mm

Load Capacity: Max. 5 Tons, Coil Width Max. 1250mm

Taper wedge expand type

Driving motor to turn the coil, 3KW, manual frequency speed control

Other design such as snubber arm /support arm/coil car as per request

  • Entry Roller & Manual Pre-shearing device

Two sets of pre-shearing device

to cut off the end of the final piece of sheet only

Working thickness: max. 0.8mm

  • Roll forming machine with cutting details as below table :
Suitable roll forming material Color steel sheet or galvanized steel sheet
Thickness 0.4mm-0.8mm
Coil input width 914/1000/1219/1250mm
Carriage Frame design Wall-plate-frame-design, dual layer
Roll forming stages 16/18, 18/18, 20/20 stages for example
Material of roller

45# steel, CNC lathes, Hard Chrome Coated

Option : with roller heat treatment

Shafts Diameter Φ75mm
Main motor power 5.5Kw with reducer
Roll forming speed 15-20m/min (Higher speed is available, depends on the specification required by the buyer)
Hydraulic group power 4.0 Kw or 5.5Kw
Material of cutter Cr12, hear treatment/Cr12Mov, heat treatment
Electric Voltage Standard 380V/50Hz/3PH or as requirements
Major Color of Machine RAL 5015(Blue) or as requirements
  • PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

  • Product Rack Un-powered, 3 units
  • Packing details

Profile Drawing/Layout/Equipment reference pictures:

Economic Design Roof Sheet Rolling Machine Double Layer With Touch Screen 0Economic Design Roof Sheet Rolling Machine Double Layer With Touch Screen 1Economic Design Roof Sheet Rolling Machine Double Layer With Touch Screen 2

Get in touch with us

Enter Your Message

You Might Be Into These