40 FT Container Portable Standing Seam Machine For Rapid Roofing System

Product Description

Portable standing seam machine in 40 FT container for rapid roofing system

Brief Introduction standing seam roof sheet roll forming machine:

There are standard standing seam roof panels such as 50-333, 50-429, 65-305, 65-333, 65-400, 65-459 and 65-500, and these profiles can be straight sheet, or tapered sheets. Like other concealed fixing standing seam roofing sheet roll forming machine, standing seam sheet roll forming machine can also handle with different widths material and manufacture different standing seam sheets on the same machine, like one machine can make both 65-400 and 65-450 type roof panels which joint with each other through clips too.

The profile is normally very long length and produce at site, so this standing seam machine is also designed/ fixed in 40FT container for easy transportation

Quick Detail:

1. Thickness : 0.6-1.0mm
2. Material : aluminum, steel
3. Input width : 600mm
4. Effective width: 468mm
5. Material weight : 5MT
6. Coil inner diameter : 508mm
7. Driven way: by driven motor
8. Cutting way: by hydraulic power pack
9. Cutting tolerance : ±1mm

Machine list:

1. 5T*600mm manual un-coiler
2. Roll forming machine
3. Hydraulic cutting device
4. Run out table
5. Siemens PLC and IOP/ touch screen, Schneider brand inverter

Description/Technical Parameter details of complete line:

• 5TX600mm manual rack for easy transportation
• Polythene film on device before feed in
• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack Un-powered, 3 units

Profile Drawing/Layout/Equipment reference pictures: