Sliding Door Guardrail Forming Machine , Customized Door Frame Making Machine

Product Details:
Place of Origin: CHINA
Brand Name: NKH MACHINERY
Certification: CE/SONCAP/CSA
Model Number: YX50-40
Payment & Shipping Terms:
Minimum Order Quantity: 1 UNIT
Price: negotiation
Packaging Details: NUDE CARGOES FOR ROLL FORMER WITH CUTTER IN 20/40FT CONTAINER, WOODEN BOX FOR PLC CONTROL CABINET
Delivery Time: 40 WORKING DAYS
Payment Terms: L/C, D/A, D/P, T/T
Supply Ability: 10 UNITS/MONTH

Detail Information

Name: Guardrail Roll Forming Machine Roller Material: 45# Steel
Raw Material: GI Sheets, G350-550 Cutting Blade Material: Cr12, Heat Treatment
Coil Weight: 1.5T Or As Per Request Warranty: 12months
High Light:

door frame making machine

,

door panel roll forming machine

Product Description

Sliding door guide rail making machine, roll former, door frame machine for door frame system

 

Quick Detail:

  1. Thickness : 0.8-1.2mm
  2. Material : GI, 350Mpa
  3. Input width : 128mm
    1. Material weight: 1.5MT cap.
    2. Driven way: by 11Kw driven motor
    3. Cutting way: stop to cut, there is waste after cut-off
    4. Cutting tolerance : ±1mm

Features:

A rolling shutter door track roll forming machine has been designed for producing steel guide rails for roller shutter doors to open up and close down.

Rolling shutter door track or guide rails are usually made out of galvanized steel or cold rolled steel strips with thickness 1.2-2mm and whenever there is a roller shutter door or a sliding door installed, there will be the door track or guide rails.

Machine list:

  1. 1.5MT*300mm manual un-coiler
  2. Roll forming machine
  3. Cooling system for each stage
  4. Rubber sealing device for silence guide
  5. Hydraulic cutting device
  6. Run out table
  7. PLC control cabinet

Description/Technical Parameter details of complete line:

  • 1.5TX300mm Manual Un-Coiler or Driven de-coiler

Un-powered; Load capacity= MAX.1.5Ton

Coil inner–diameter=410-570mm

Coil Width= MAX.300mm

  • Roll forming machine with cutting details as below table :
Suitable roll forming material galvanized steel sheet
Thickness 0.8-1.2mm
Strip width 128mm
Carriage Frame design Wall-plate-frame-design
Roll forming stages 20 stages
Roller material 45# steel, heat treatment, hard chrome coated
Shafts Diameter Φ75mm
Main motor power 11Kw with reducer
Line speed of roll former 15mtr per min
Hydraulic group power 4 Kw
Material of cutting blade Cr12, hear treatment
Electric Voltage Standard 415V/50Hz/3PH or requirements
Major Color of Machine Painted RAL 5015(Blue) or customized
  • PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

  • Product Rack 4 meter length rolled type

Profile Drawing/Layout/Equipment reference pictures:

 

Sliding Door Guardrail Forming Machine , Customized Door Frame Making Machine 0

Get in touch with us

Enter Your Message

You Might Be Into These