7.5 Kw Sandwich Panel Roll Forming Machine Roofing Roll Former For Continuous PU Line

Product Description

Roofing roll former for continuous PU line, lower level roll forming, sandwich panel machine

Brief Introduction:

PU rolling shutter slat production line had been originally innovated to produce roller shutter slats (insulated with PU or polyurethane) used as roller shutter doors or windows blinds for European markets.

A roller shutter door is a type of door that is open and close by raising and lowering along the roller shutter door tracks or roller shutter guide rails on the two sides of doors. Roller shutter doors can be constructed by steel rolling shutter slats without thermal materials insulated, roller shutter door panels, and PU foam insulated rolling shutter slats etc. In some regions or areas where it’s too cold in winter, people prefer to add thermal materials (PU or polyurethane to be specific) inside the rolling shutter or roller shutter to preserve heating, and based on the request, PU rolling shutter door slat production line has been invented.

Quick Detail:

1. Thickness : 0.4mm-0.8mm
2. Material : GI/SS/Pre-painted Coil, 245Mpa, 345Mpa, 550Mpa
3. Input width : as per request
4. Effective width: as per request
5. Driven way: by driven motor
6. Cutting way: NO

Description/Technical Parameter details of complete line:

• Roll forming machine without cutting details as below table :

Packing standard:

Nude cargoes for roll former

Profile Drawing/Layout/Equipment reference pictures: