logo
vr
Good price online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Purlin Roll Forming Machine
Created with Pixso. PLC Control Purlin Roll Forming Machine For Pressing / Punching / Notching
Detail Information
Place of Origin:
CHINA
Certification:
CE/SONCAP/CSA
Name:
Purlin Forming Machine
Roller Material:
GCr15, Heat Treatment, Hard Chrome Coated/Cr12, Heat Treatment
Shaft Diameter:
75mm
Cutting Blade Material:
Cr12, Heat Treatment
Raw Material:
GI Sheets, G350
Warranty:
12 Months
Packaging Details:
NUDE CARGOES FOR ROLL FORMER WITH CUTTER IN 20/40FT CONTAINER, WOODEN BOX FOR PLC CONTROL CABINET
Supply Ability:
10 UNITS/MONTH
Highlight:

purlin making machine

,

steel frame roll forming machine

Product Description

Rolled making machine with LOGO pressing/ punching/ notching, sigma/ omega panel available

 

Quick Detail:

  1. Thickness : 1.0-1.5mm
  2. Material : GI sheets, 245Mpa
  3. Coil width: 411/550mm
  4. Material weight : 5Mt
  5. Coil inner diameter :510mm
  6. Driven way: by 15kw*2 driven motor
  7. Cutting way: by stop to cut design
  8. Cutting tolerance : ±1mm

Machine list:

  1. Hydraulic De-coiler
  2. Pre-leveling Device
  3. Hydraulic Pre-punching device
  4. Roll forming machine
  5. Hydraulic Punching Post- cut device
  6. Run out table
  7. PLC control systems

Description/Technical Parameter details of complete line:

  • 5TX600mm Hydraulic Un-coiler or manual de-coiler

Un-powered; Load capacity= MAX.5Ton

Hydraulic system to expand coil inner hole, Pump motor: 3KW

Coil inner–diameter=510+/-30mm

Coil Width= MAX.600mm

Mandrel rotation: Draft type

Or as the budget, the user can also adopt to the driven motor to push the sheets

  • Pre-Leveling Device

Pre-Level Device with 4 over 3 shafts to remove the Coil-set

Share the same motor with the roll former

  • Hydraulic Pre-punching device

Share in the same hydraulic group with post cut

  1. Punching the order holes
  2. Press the LOGO as required
  3. Roll forming machine details as below table :
Suitable roll forming material Galvanized steel sheet
Thickness 1.2mm
Carriage Frame design wall-plate-frame-type
Roll forming stages 24 stages
Roller material GCr15, heat treatment, hard chrome coated
Shafts Diameter Φ75mm
Main motor power 15Kw*2
Production speed 2--3m/min
Hydraulic Group 11Kw
Cutting design Two upper blades/one lower blade
Electric Voltage Standard 380V/50Hz/3PH or as request
Major Color of Machine Painted RAL 5015(Blue) or as request

 

  • PLC Control System

Control the quantity & cutting length automatically

Combined with: Siemens brand PLC and Touch Screen

Schneider brand Inverter, Omron encoder, etc

Cut-to-length tolerance≤±1mm

Control voltage 24V

  • Product Rack 4 meter long ,rolled type

Application:

This profile is with many different holes as request

It consist of de-coiler, pre-leveling, hydraulic pre-punching device, roll forming machine, punching/LOGO pressing/cutting device and run out rack and PLC control cabinet

 

Profile Drawing/Layout/Equipment reference pictures:

 

PLC Control Purlin Roll Forming Machine For Pressing / Punching / Notching 0