Professional Metal Roof Ridge Cap Roll Forming Machine / Step Flashing Machine

Product Details:
Place of Origin: CHINA
Brand Name: NKH MACHINERY
Certification: CE/SONCAP/CSA
Model Number: YX100
Payment & Shipping Terms:
Minimum Order Quantity: 1 UNIT
Price: negotiation
Packaging Details: NUDE CARGOES FOR ROLL FORMER WITH CUTTER IN 20/40FT CONTAINER, WOODEN BOX FOR PLC CONTROL CABINET
Delivery Time: 45 WORKING DAYS
Payment Terms: L/C, D/A, D/P, T/T
Supply Ability: 5 UNITS/MONTH

Detail Information

Name: Ridge Cap Machine Raw Material: Galvanized Sheets, 345Mpa
Thickness: 0.4mm-0.6mm Cutting Blade Material: Cr12, Heat Teatment
Control System: PLC Control System Roller Material: 45#, CNC, Hard Chrome Coated
High Light:

ridge cap roll former

,

metal tile forming machine

Product Description

Step flashing machine, roofing ridge cap forming machine

 

Quick Detail:

  1. Thickness : 0.4-0.6mm
  2. Material : pre-painted steel
  3. Input width :520mm
  4. Material weight : 3MT
  5. Coil inner diameter : 480mm
  6. Driven way: by driven motor
  7. Cutting way: no waste cut
  8. Cutting tolerance : ±1mm

Machine list:

  1. 3T*600mm hydraulic un-coiler
  2. Roll former
  3. Hydraulic cutting device
  4. Run out table
  5. Siemens PLC and IOP/ touch screen, Schneider brand inverter

Description/Technical Parameter details of complete line:

  • 3TX600mm Hydraulic Un-Coiler

Hydraulic system for expansion coil-inner-hole with 4 palms

Pump power=1.5KW

Load capacity=3 Ton

Coil Inner – diameter =451-530 mm

Coiler Width=Max. 600 mm

  • Roll forming machine with cutting details as below table :
Suitable roll forming material Color steel sheet
Thickness 0.4mm-0.6mm
Coil input width 520mm
Carriage Frame design Wall-plate-frame-design
Roll forming stages 14 stages
Material of forming roller 45# steel, CNC lathes, Hard Chrome Coated
Shafts Diameter Φ75mm
Main motor power 5.5Kw with reducer
Rolling speed of roll former 12-15m/min
Hydraulic group power 3.0 Kw
Material of cutting blade Cr12, hear treatment
Electric Voltage Standard 380V/50Hz/3PH or as requirements
Major Color of Machine Painted RAL 5015(Blue) or as requirements
  • PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

  • Product Rack Un-powered, 3 units

Brief Introduction:

There are different roof flashing roll forming machines based on different technical requirements on the final products, however, in the market people most of time use three kinds of roof ridge cap roll forming machines. Roof ridge caps with pressed STEPs, Roof ridge cap without steps, and V shaped roof flashing without STEPs. It has to be pointed out that a roof ridge caps without STEPS sometimes can be used both as roof ridge caps and as roof valley flashings. In addition, there is a similar machine, Glazed Tile Roll Forming Machine.

This roof ridge caps without pressed steps design

Profile Drawing/Layout/Equipment reference pictures:

Professional Metal Roof Ridge Cap Roll Forming Machine / Step Flashing Machine 0

Get in touch with us

Enter Your Message

You Might Be Into These