Heavy Gauge Steel Frame Roll Forming Machine 5mm Thickness With Gearbox

Product Details:
Place of Origin: CHINA
Brand Name: NKH MACHINERY
Certification: CE/SONCAP/CSA
Model Number: C/Z100-300
Payment & Shipping Terms:
Minimum Order Quantity: 1 UNIT
Price: negotiation
Packaging Details: NUDE CARGOES FOR ROLL FORMER WITH CUTTER IN 20/40FT CONTAINER, WOODEN BOX FOR PLC CONTROL CABINET
Delivery Time: 40 WORKING DAYS
Payment Terms: L/C, D/A, D/P, T/T
Supply Ability: 10 UNITS/MONTH

Detail Information

Name: Purling Roll Forming Machine Raw Material: GI Sheets, G350
Cutting Blade Material: Cr12, Heat Treatment Warranty: 12 Months
Roller Material: GCr15, Heat Treatment, Hard Chrome Coated/Cr12, Heat Treatment Shaft Diameter: 75mm
High Light:

purlin roll former

,

steel frame roll forming machine

Product Description

Heavy gauge steel framing truss machine, 5mm thick, with gear box in every stage

 

Quick Detail:

  1. Thickness : 3.0-5.0mm
  2. Material : GI sheets, 245Mpa
  3. Material weight : 5Mt
  4. Coil inner diameter : 510mm
  5. Driven way: by 38kw driven motor
  6. Cutting way: by stop to cut design
  7. Cutting tolerance : ±1mm

Application:

This is auto exchange heavy gauge Cee purlin machine

The sketch as below machine list

The design is heavy stronger gauge design, the carriage frame is stronger than normal and the gear box is necessary for every stages

It is also should adopt to pre cut design, cut to length control

There is no post cutting device

 

Machine list:

  1. 8Mt hydraulic un-coiler with coil car
  2. Pre-leveling device
  3. Hydraulic pre-punching, pre-cutting device
  4. Auto exchange Cee purlin machine from C150-C300
  5. Gear box on every stages to make the machine work stable
  6. Run out rolled rack
  7. PLC control systems

Description/Technical Parameter details of complete line:

  • 8TX600mm Hydraulic & Driven de-coiler

Load capacity= MAX.5Ton

Hydraulic system to expand coil inner hole, Pump motor: 3KW

Coil inner–diameter=510+/-30mm

Coil Width= MAX.600mm

Driven motor to push the sheets

Hydraulic top arm to hold the sheets

  • Pre-Leveling Device

Pre-Level Device with 4 over 3 shafts to remove the Coil-set

Share the same motor with the roll former

  • Hydraulic Pre-punching/Pre-cutting device

Hydraulic group: 18.5Kw

Stop to pre-cut, cut to length control

To punch below holes

Single slotted or round holes on web

Double slotted or round holes on web

Single slotted or round holes on flange each side

  • Roll forming machine details as below table :
Suitable roll forming material galvanized steel sheet
Thickness 3.0-5.0mm
Carriage Frame design Heavy gauge stand-frame-design
Roll forming stages 15 stages
Roller material Cr12Mov, heat treatment
Shafts Diameter Φ95mm
Main motor power 38Kw
Production speed 12m/min
Electric Voltage Standard 380V/50Hz/3PH or as request
Major Color of Machine Painted RAL 5015(Blue) or as request

 

  • PLC Control System

Control the quantity & cutting length automatically

Combined with: Siemens brand PLC and Touch Screen

Schneider brand Inverter, Omron encoder, etc

Cut-to-length tolerance≤±1mm

Control voltage 24V

  • Product Rack 4 meter long ,rolled type

Profile Drawing/Layout/Equipment reference pictures:

 

Get in touch with us

Enter Your Message

You Might Be Into These